Reminder Settings - Brainlab EXACTRAC INFRARED MONITORING Clinical User Manual

5.4.3

Reminder Settings

Accessing
Reminder Settings
Reminder Tab
Calibration Settings
See "SYSTEM CALIBRATION AND QA" on page 35.
Print Preview
Settings
See "Generating Treatment Reports" on page 74..
Confirming Your To confirm your selection, press Apply. You can now either open another tab page in the dialog, or
Selection press OK to exit the dialog.
Clinical User Guide Rev. 1.1, ExacTrac Infrared Monitoring Ver. 1.0
Options
To access the settings for calibration and for print previews, select General Settings in the Op-
tions menu, and open the Reminder tab in the dialog that is displayed.
Options
Never remind of Calibration
Remind of Calibration every
[x] day(s)
Options
Never prompt for print
preview.
Prompt for print preview
before discarding a patient.
Automatically open print
preview before discarding a
patient.
Figure 26
You will not be reminded by the system to perform calibration.
You will be reminded by the system during startup to perform
calibration in accordance with the value you set using the spin
box.
You will not be prompted by the system to open the print pre-
view before closing the patient data.
You will be prompted by the system to open the print preview
before closing the patient data.
The print preview is opened automatically before closing the
patient data.
55