10. Technical Specifications; Oscilloscope - Owon TAO3000 Dual-Channel Series User Manual

10. Technical Specifications

Unless otherwise specified, the technical specifications applied are for
TAO3000 dual-channel series only, and Probes attenuation set as 10X. Only if
the oscilloscope fulfills the following two conditions at first, these specification
standards can be reached.
 This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on
P13).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".

Oscilloscope

Performance Characteristics
Bandwidth
Vertical Resolution (A/D)
Channel
Waveform Capture Rate
Multi-level Gray Scale Display &
Color Temperature Display
(Use gray scale to indicate frequency of
occurrence, where frequently occurring
waveform are bright.)
Magnifier Function
(The magnifier window can display the
magnified wave of the wave selection
horizontally and vertically.)
Mode
Acquisition
Sample rate
10.Technical Specifications
TAO3072
TAO3072A
TAO3102
TAO3102A
TAO3122
TAO3122A
TAO3072
TAO3102
TAO3122
TAO3072A
TAO3102A
TAO3122A
TAO3072
TAO3102
TAO3122
TAO3072A
TAO3102A
TAO3122A
Normal, Peak detect, Averaging
TAO3072
126
Instruction
70 MHz
100 MHz
120 MHz
8 bits
8 bits/12 bits/14 bits
2
45,000 wfms/s
Support
Not support
Support
Dual CH 500 MSa/s