Implement Sampling Setup - Owon TAO3000 Dual-Channel Series User Manual

you can set anyone of them, the other will be changed synchronously.
Decoded information interpretation:
Information
Identifier
Overload Frame
Error Frame
Data Length code
Data
Cyclic Redundancy Check
Note:
 Use the upper knob to adjust the thresholds of bus trigger and bus
decoding.
 When the ACK (ACKnowledge Character) of Data Frame or Remote
Frame is not met, two red error marks will be displayed in the
corresponding position in the waveform.
 Error Frame, Remote Frame, and Overload Frame will be identified in the
"Data" column in the event table (Data Frame will not be identified).
CAN Decoding menu list:
Menu Setting
Bus
CAN
Type
Format
EventTable
Display
Save
EventTable
ASCII Table

Implement Sampling Setup

Click to call up the menu panel. Click the Acquire softkey on panel, Acqu
4.Advanced User Guidebook
Abbreviation
I, ID, or do not display
OF
EF
L, DLC, or do not display
D, Data, or do not display
C, CRC, or do not display
Instruction
Set bus type of decoding as CAN.
Binary
Decimal
Set the display format of the bus.
Hex
ASCII
ON
Select "ON" to display the event table.
OFF
If a USB storage device is currently connected to the
instrument, save the event table data in a .csv
(spreadsheet) formatted file on the external USB
storage device.
ON
Select "ON" to display the ASCII table.
OFF
48
Background
Green
Green
Green
Blue
Black
Valid: Purple
Error: Red