General Safety Requirements - Owon TAO3000 Dual-Channel Series User Manual

1. General Safety Requirements

Before use, please read the following safety precautions to avoid any
possible bodily injury and to prevent this product or any other connected
products from damage. In order to avoid any contingent danger, ensure this
product is only used within the range specified.
Only the qualified technicians can implement the maintenance.
To avoid Fire or Personal Injury:
Connect the probe correctly. The grounding end of the probe

corresponds to the grounding phase. Please don't connect the
grounding end to the positive phase.
Use Proper Power Cord. Use only the power cord supplied with the product

and certified to use in your country.
Connect or Disconnect Correctly. When the probe or test lead is connected

to a voltage source, please do not connect and disconnect the probe or test
lead at random.
Check all Terminal Ratings. To avoid fire or shock hazard, check all ratings

and markers of this product. Refer to the user's manual for more information
about ratings before connecting to the instrument.
Do not operate without covers. Do not operate the instrument with covers or

panels removed.
Avoid exposed circuit. Do not touch exposed junctions and components

when the instrument is powered.
Do not operate if in any doubt. If you suspect damage occurs to the

instrument, have it inspected by qualified service personnel before further
operations.
Use your Oscilloscope in a well-ventilated area. Make sure the instrument

installed with proper ventilation, refer to the user manual for more details.
Do not operate in wet conditions.

 Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.

1.General Safety Requirements
1