Information Display; Auto Or Manual Range; Multimeter Recorder - Owon TAO3000 Dual-Channel Series User Manual

testing for continuity.

Information Display

Show/hide the information window on the top right of the display.
(1) Select Configure in the bottom menu, select Show Info in the right menu as
ON. The information window will be shown on the display.
(2) Select OFF to hide.

Auto or Manual Range

Auto range is set as default. To switch auto or manual range, do the following
steps:
(1) Select Configure in the bottom menu.
(2) Select Auto Range in the right menu,
(3) Select Switch Range in the right menu, MANUAL will be shown on the display.
Press this softkey to switch range.
Note: When testing diode, testing continuity, and measuring capacitance, manual
range is disabled.

Multimeter Recorder

You can use the multimeter data recorder to record the measurements when
measuring current/voltage by multimeter (optional).
Click to call up the menu panel. Click the Utility softkey on panel, select
Function in the bottom menu, select DAQ in the left menu.
The description of DAQ Menu is shown as the follows:
Function
Menu
Set Duration
STRT
Start or stop recording.
STOP
Storage
When internal storage is selected, you can export the internal
Export
record file to a USB memory device.
To record the current/voltage measurements in the multimeter, do the
5.Use the Multimeter
Setting Description
Interval Set the record interval (
"d h m s" represents day, hour, minute, second.
E.g. "1 02:50:30" represents a day and 2 hours,
50 minutes and 30 seconds.
Press Duration to switch between the time unit,
click
days for internal storage, 10 days for external
storage.
Enable Turn on or off the recorder.
Internal
Save to internal storage or USB memory device.
External
will be shown on the display.
AUTO
0.5s - 10s, step by 0.5s)
or to set the value. Max duration: 3
99