Waveform Math - Owon TAO3000 Dual-Channel Series User Manual

Vertical
(div)
Vertical
(V/div)
User
Edit fun
Function
Vertical
(div)
Vertical
(V/div)
channel
type
DIR
window
cut-off fre
or
upper down
Vertical
(div)

Waveform math

Taking the additive operation between Channel 1 and Channels 2 for example,
the operation steps are as follows:
1. Click to call up the menu panel. Click the Math softkey on panel to
switch to the ON state and display the math menu on the bottom. The pink M
4.Advanced User Guidebook
Click or to adjust the vertical position of the
Math waveform
Click or to adjust the vertical division of the
Math waveform
Intg, Diff, Sqrt, and user defined function
Click or to adjust the vertical position of the
Math waveform
Click or to adjust the vertical division of the
Math waveform
CH1
Select channel
CH2
Only the signals whose frequencies are
low-pass lower than the current cut-off frequency
can pass the filter.
Only the signals whose frequencies are
high-pass greater than the current cutoff frequency
can pass the filter.
Only the signals whose frequencies are
greater than the cutoff frequency down
band-pass
and
frequency upper can pass the filter.
Only the signals whose frequencies are
lower than the current cutoff frequency
band-reject
down or greater than the current cutoff
frequency upper can pass the filter.
Retangular
Tapered
Triangular
Select window for digital filter
Hanning
Hamming
Blackman
Click or to set cut-off frequency
Click or to adjust the vertical position of Math
waveform
80
lower than the current cutoff