Meaning Of The Led; Meaning Of The Led On The Dmc20 - Siemens SINAMICS S120 Combi Manual

9.2.4

Meaning of the LED

9.2.4.1

Meaning of the LED on the DMC20

Table 9- 18 Meaning of the LED on the DMC20
LED Color
READY -
Green
Orange
Red
Green/red
Green/orange
or
red/orange
The following reference contains information about the cause of faults and how they can be
resolved:
SINAMICS S120 Commissioning Manual with STARTER
SINAMICS S120/S150, List Manual
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7
Status Description, cause
Off The electronics power supply is missing or outside the
permissible tolerance range.
Continuous The component is ready for operation and cyclic DRIVE-
light CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous This component has at least one fault.
light
Note:
The LED is activated irrespective of whether the corre-
sponding messages have been reconfigured.
Flashing Firmware is being downloaded.
light
0.5 Hz
Flashing Firmware download is complete. Wait for POWER ON.
light
2 Hz
Flashing Component recognition via LED is activated. This function
light is parameterizable (see SINAMICS S120/S150 List Man-
ual).
Note:
Both options depend on the LED status when component
recognition is activated.
Additional system components
9.2 DRIVE-CLiQ Hub Module DMC20
Remedy
---
---
---
Correct and
acknowledge
the fault.
---
Carry out a
POWER ON.
213