Installing The Reinforcement Plates; Description - Siemens SINAMICS S120 Combi Manual

S120 Combi Power Modules
4.7 Installation
4.7.2

Installing the reinforcement plates

4.7.2.1

Description

The reinforcement plates for the S120 Combi fulfill the following functions:
● Air is routed in a specific way to dissipate the heat of the external heat sink
● They stabilize the mounting panel
The reinforcement plates must always mounted. They should be installed at the rear of the
mounting panel or the control cabinet before installing the S120 Combi Power Module and
the external fan unit.
Note
The reinforcement plates are not included in the scope of delivery of the S120 Combi. They
must be separately ordered (Article number: 6SL3161-1LP00-0AA0).
90
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7