Siemens SINAMICS S120 Combi Manual page 267

1. Insert the DRIVE-CLiQ cabinet bushing from the outside of the control cabinet through
the cutout in the control cabinet.
2. Attach the DRIVE-CLiQ cabinet bushing to the outer control cabinet panel using 2 M3
screws and 2 nuts. In order to ensure good electromagnetic compatibility, a good
electrical connection must be established between the DRIVE-CLiQ cabinet gland and
the cabinet panel over a large surface area.
①
②
③
Figure 11-6
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7
Control cabinet panel
M3 screw, tightening torque 0.8 Nm
DRIVE-CLiQ cabinet bushing
Installing the DRIVE-CLiQ cabinet bushing for cables with DRIVE-CLiQ connectors
Accessories
11.1 DRIVE-CLiQ cabinet bushing
267