Turning On; Start Screen Explanation; Figure 2-3: Start Screen Defined - 3M EVM Series User Manual

14

Turning on

Start screen explanation

Turning on
1. To turn on the EVM, press the On/Off /Esc
Start screen explanation
The main screen you encounter and is referenced throughout the
manual is the Start screen. From the start screen, you can access the
measurement screens, the setup screen, calibration screens, file
system screen (used to view past sessions and clear data), and unit
information screen (includes serial number information). (The
measurement screens are explained in more detail in Chapter 5.)
1. To select a menu option, press
2. To view the measurement screens, press the Right or Left
Indicators
 Battery power:
 Stop:
Start Screen
Press the left or right arrow key to toggle
through measurement views.
Menu options
A selected menu is indicated by the
shaded text.
Screen descriptions
A note explaining how to access the
measurement screens by pressing the
right or left arrows.
 A Quest Technologies splash screen will appear including the
firmware version name.
 Proceeding the splash screen, you will be viewing the Start
screen.
Enter . (This will open the selected menu screen.)
Arrow and this will toggle you through the measurement views.
Arrows and then press

Figure 2-3: Start screen defined

.