110
EVM Reports and Printing
Figure 6-9: Logging EVM setups EVM and auto-run setting
4. To enable additional date settings (Date 2 – Date 4), repeat step 3.
5. To set the auto-run, click on
configurations".
Figure 6-11: EVM Auto-Run with Date setting
Day of week and auto-run setting
To enable Date mode, please follow below.
1. Click on the Auto-Run tab (see 1) from the EVM's Instrument Communications panel.
2. Click in the
3. To select a day or days click in the appropriate day
4. To set the Start Time and Duration, either click on the
5. To enable Day of Week 2, repeat steps 3 -4.
6. To set the auto-run, click on
configurations".
or save and send to the EVM (for more details see "Saving and sending
1
1
2
3
Enabled checkbox and click in the
1
2
3
Figure 6-12: EVM Auto-Run with Day of Week setting
2
Day of Week field (see 2).
boxes.
or type in numeric value (see 3).
or save and send to the EVM (for more details see "Saving and sending