Subscribe to Our Youtube Channel
Related Manuals for 3M Edge
Summary of Contents for 3M Edge
- Page 1 3M Occupational Health and Environmental Safety Division The Edge Personal Noise Dosimetry The Edge Quick Start Guide...
- Page 2 Resetting the Edge is performed by either using the 3M Detection Management Software DMS when downloading or setting up parameters. Another option is from the Edge’s shortcut reset menu. • To reset from the keypad ensure the Edge is off, then: 1. Press key. 2. Press and hold keys when the splash screen appears.
- Page 3 Calibrating A calibration may be performed before and/or after a dosimetry test. 1. Remove the windscreen while the Edge is turned on and stopped. 2. Slide the Edge into the cavity of the calibrator, ensuring the adapter ring is inserted into the calibrator.
- Page 4 Running a study 1. Once the Edge is turned on, press and hold the button. • A 3, 2, 1 countdown will appear. Then, a run indicator will appear on the top of the display. Also the LED will flash green unless this was disabled in the DMS via the heartbeat field.
- Page 5 Downloading data and DMS 1. To communicate with DMS and the Edge, turn on the Edge and plug in the USB cable from the edge to the pc. Then, open 3M Detection Management software DMS. Communicating DMS start screen 2. Click on the button.
- Page 6 Occupational Health & Environmental Safety Division Quest Technologies, a 3M Company ISO 9001 Registered Company ISO 17025 Accredited Calibration Lab 1060 Corporate Center Drive Please recycle. Printed in USA. Oconomowoc, WI 53066 © 2012 3M Customer Service: 262-567-9157 Toll Free: 800-245-0779 All rights reserved.
Need help?
Do you have a question about the Edge and is the answer not in the manual?
Questions and answers