Lock/Secure Run And/Or Setup; Figure 3-20: Lock Softkey - 3M EVM Series User Manual

40
Setting up parameters via the keypad

Lock/secure run and/or setup

Lock/secure run and/or setup
The lock or security feature is designed to lock the EVM during a run to
ensure the session will not be stopped unless the lock feature is
disabled. Likewise, this feature includes a locked (or secure) setup
mode which will stop a user from editing a set-up. Once one or both
of these options are programmed with a code, it is set by pressing the
Lock softkey in the Setup menu.


1.
2.
3. In the Lock/Security Modes screen, Run and Setup are "disabled"
NOTE: when securing or locking the instrument, it will be in lock
mode even when powered off/on.
Setting lock setup or run
From the Start screen, select and open the Setup screen.
Press the Lock softkey.

Figure 3-20: Lock Softkey

as the default setting.
Lock
Opens to the Lock screen