Signal Destinations - Aastra 415 System Manual

Operation and Maintenance
Tab. 102 Example of event table
Event type
Total synchronization loss
In this example an event message is sent to the message destinations if there is a
Total synchronisation loss
message 10 times within 1 hour.
6. 5. 1. 3

Signal destinations

After a first start, all event tables are assigned to a message destination. (Exception:
Local destination and
tables to several or no message destinations
The destinations are configured in the
Signal destination system phone
Depending on the allocated event table (normally Table 1), event messages are
sent to all the system phones that have a display and are entered in message
group 8.
External signal destinations
Depending on the event table allocated, event messages (normally Table 2) are
sent to a specified external signal destination. Two external signal destinations can
be specified:
• 1 primary external signal destination
• 1 alternative external signal destination
If the system issues an event message, the event message opens a PPP communi-
cation channel from the public network of the communication server to a terminal
adapter or modem. Once the event message has been confirmed, the system clears
down the PPP connection.
230
Frequency
10
event message when the system generates the event
SNMP destination use this event table.) You can assign event
Message destinations
Time period
1
( =h1) view.
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014