Removing The Motor From Its Housing - Micron Spraydome Series Instruction Manual

Maintenance 57

9.4.4 Removing the Motor from its Housing

The following procedure describes the removal of the motor from its housing. This
procedure can be carried out without disconnecting the electrical wires from the main
assembly.
 Remove the motor housing front plate; retained by four self tapping screws.
 Slide the two rubber boots along the wires to allow the wires to move forward with
the motor.
 Slide the motor out of the motor housing along with its o-rings and wires.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser