Safety - Micron Spraydome Series Instruction Manual

14

2 SAFETY

WARNINGS AND PROHIBITIONS
Do not insert fingers or any foreign object into the equipment. This may cause a
risk of harm and may damage the equipment.
Do not dismantle or modify the equipment. This may cause a risk of harm and
may damage the equipment.
Do not operate the equipment if there are visible symptoms of a problem, such
as leaking fluids, abnormal noise or structural damage. Operating the equipment
under such conditions may cause a risk of harm or may damage the equipment
or the environment.
Risk of crushing of the whole body or limbs.
Risk of crushing of hands or fingers.
Do not stand between the equipment and the vehicle to which it is mounted.
Do not stand, sit or lie beneath any part of the equipment unless the equipment
is adequately supported on suitable floor standing supports.
Do not stand, or allow others to stand, within the reach of extended or lowered
parts of the equipment (swivel range).
Do not stand, or allow others to stand, within the stroke area of the three point
linkage (tractor mounted equipment).
Danger from leaking substances. Substances may be harmful and/or under high
pressure.
Risk of contact with toxic or hazardous substances.
Always read and retain the instructions on chemical used in this equipment.
Ensure that all instructions for the chemicals being used remain with the
equipment until the equipment has been cleaned and is ready for storage or re-
use. If practicable display the details of the chemicals, being used in the
equipment, on the exterior of the equipment where they are easily visible.
Do not drink fluids from any part of the equipment including the hand-wash and
rinse tanks.
Do not use water from the hand wash facility for washing the face or eyes.
Do not eat, drink or smoke when operating the equipment.
Do not dispose of toxic or hazardous chemicals or fluids into drains or water
courses.
After use remove and clean all protective clothing. Thoroughly wash hands and
face.
Some surfaces and hoses may become hot during operation. Take care when
handling and to avoid contact with, or close proximity to, flammable materials.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
Safety