Micron Spraydome Series Instruction Manual page 40

40
 Remove the feed nozzle. Use a twisting motion to ease the feed nozzle from the
plastic cover. Take care not to damage the plastic components.
 Reconnect the feed nozzle to the small plastic elbow
 Start the spraying pump and ensure the output from the feed nozzle is steady.
 Hold the feed nozzle level with its location in the atomiser. Place the measuring
cylinder under the feed nozzle and measure the quantity of liquid dispensed in
one minute.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
Calibration