Micron Spraydome Series Instruction Manual page 20

20 Installation
Using the clamp bolt, washers and nuts provided, assemble the vertical support bar
to the bracket on the spray head breakaway assembly.
 Insert the clamp bolt from the front of the sprayer.
 Fit the Nyloc nut and thinner washer to the bottom thread.
 Tighten the Nyloc nut so that the vertical support tube can rotate in the breakaway
bracket.
 Fit the clamp nut and thicker washer to the top thread
 Tighten the clamp nut to lock the vertical support tube in position.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser