Hose Connections - Micron Spraydome Series Instruction Manual

26
 Connect the centre pin of the two pin electrical socket on the controller backplate
to the positive (+) terminal of your pump. Connect the outside pin of the two pin
electrical socket on the controller backplate to the negative (-) terminal of
your pump.
 Ensure that the switches on the control units (2) are all in the off position. Switch
the Inline switch (1) to the on position. Switch the switch on the control unit (2) to
the on position. The pump will start. Repeat this step for any further control units
you have installed.
3.6

Hose Connections

DANGER from contact with harmful substances! Always wear protective
clothing, gloves and eye protection. Wash hands, exposed skin and
protective clothing after handling the equipment. Clean up spilled or
leaked fluids in accordance with the manufacturer's instructions.
Wear Gloves
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
Installation
+
-
Wear Eye
Protection
+ -
1
Wear Protective
Clothing
2
Wash hands