Spraying - Micron Spraydome Series Instruction Manual

Spraying

45
7 SPRAYING
Application Method
Spraying should always take place at the correct time for the product being applied.
Spraying should always take place under acceptable weather conditions.
Do not spray when the ground is too wet.
Spraying should always take place when wind speed is low.
Keep animals and people away from the area while spraying is taking place. Refer to
the product label for information regarding access to the treated area after treatment.
Operators using vehicles without an enclosed cabin must wear the appropriate
personal protective equipment (PPE) during spraying.
Operators should plan their spray route carefully to avoid driving over sprayed areas.
Operator should take note of the prevailing wind direction and always turn into the
wind after each spray pass.
Turn the sprayer off at the end of each row. Do not turn the sprayer on until you are
ready to begin the next spray pass.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser