Micron Spraydome Series Instruction Manual page 15

Safety 15
Use Caution and reduce speed when manoeuvring a vehicle with mounted
equipment.
The equipment may reduce or obscure the operator's vision.
The equipment may obscure the visibility to others of vehicle mounted warning
marks, beacons and lights.
The equipment may obscure vehicle mounted lighting. Ensure that vehicle lights
are visible when in transit. Ensure the working area has sufficient light for safe
operation.
The additional weight of the equipment may affect the steering and stability of
the vehicle.
Use extreme caution when turning on sloping ground as the equipment may
alter the vehicles balance and centre of gravity.
Use extreme caution when turning as the equipment may alter the required
turning circle of the vehicle.
Use extreme caution when passing obstacles and through gaps as the
equipment may alter the width of the vehicle.
Ensure that the extremities of the equipment are visible to the operator at all
times. Attach additional marking devices or visibility aids where required.
Use additional person(s) to assist with manoeuvring where operator vision is
obscured.
During use of the equipment make regular assessment of weather condition,
wind speed and direction adjust activity as appropriate.
Leave the vehicle in a safe condition before leaving the operators position to
examine or adjust the equipment.
Run the equipment only on the indicated supply voltage. Use of incorrect supply
voltage may cause a risk of fire or other harm and may damage the equipment.
Ensure that all connection sockets are clean and free from contamination before
and after use.
When connecting or disconnecting cables and hoses to the equipment; always
grasp the connector directly, do not hold by or pull on the cable or hose as this
may cause damage.
Ensure the electrical power supply is adequate for the equipment. An
inadequate power supply may cause the equipment to malfunction or fail.
Disconnect the unit from the power supply when not in use for an extended
period.
Always lift the equipment by the lifting or mounting points where provided.
Always wear personal protective equipment when instructed to do so.
Ensure the equipment is securely mounted on floor standing mounts before
attempting any maintenance or repair operations.
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser