Sprayer Features - Micron Spraydome Series Instruction Manual

Figure 1- A typical configuration for vineyards
1.1

Sprayer Features

Spraydome shown. Undavina and Spraydome use common components.
1
2
3
4
5
1 Controller Backplate*
Quick-Release Coupling
2
(For fitment to existing tank and pump
systems. Part number AL001)
3 Backplate Mounting Bracket*
4 Power Wire Assembly*
Shield
5
(may also be referred to as 'dome'
or 'shroud')
2 Pin Electrical Plug*
6
(For connection to existing pump
system. Part number ST028)
*Required for CDA systems only.
Figure 2 - Component recognition
Introduction
7
6
8
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
9
10
7 Controller (single)*
8 Breakaway Assembly
9 Vertical Support Tube
10 Clamp Bolt Assembly
11 'T'-Bar Mount
Mounting Tube
12
(complete with 'U' bolts and clamp
plates)
11
12
11