Mixing And Filling - Micron Spraydome Series Instruction Manual

42

6 MIXING AND FILLING

Wear Gloves
Plumbing Circuit
The Undavina, Spraydome and Spraymiser range of spray heads are normally
supplied from purpose made 60, 80, 100 or 200 litre Enviro tank systems.
Essential plumbing features of each tanking system are shown in Figure 6 below.
3
1 Spray Tank
2 Rinse Tank
(clean water only)
3 Hand Wash Tank
(may be fitted separately on ATV)
4 Spray Tank Agitation
5 Tank Selection Valve
(main tank or rinse tank)
6 Pressure Gauge
(spray line)
Figure 6 – Tank system Features
1
Your tank system must include an inline filter of 50 mesh size (blue – ISO19732).
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
Mixing and Filling
Wear a face shield
or Eye Protection
1
5
8
10
9
Wear Protective
Clothing
2
4
6
11
7 Pressure Regulating Valve
(to control line pressure)
8 Drain Isolation Valve
9 Drain Outlet
1
10 Filter
11 Pump
(Electric, Hydraulic or PTO driven)
12 Spray Boom/Line Isolation Valve
13 Outlet to Boom/Line
Wash hands
7
12
13