Mounting To An All Terrain Vehicle (Atv) - Micron Spraydome Series Instruction Manual

3.2

Mounting to an All Terrain Vehicle (ATV)

Micron Sprayers Ltd. recommends mounting the Spraydome/Undavina to the front
rack of your ATV. Ensure that the rack is approved to carry the combined weight of
the components you intend to mount. Spraymiser units should be mounted to the rear
of your ATV. Universal mounting brackets are available from Micron Sprayers Ltd. or
their agents. It is not possible to provide brackets for specific vehicles and some
additional fabrication may be necessary to fit the equipment.
Figure 4 – Spraydome/Undavina/Spraymiser installation to ATV
 Position the mounting tubes so that the Spraydome/Undavina spray head
breakaway or Spraymiser will operate freely without contacting the ATV. Avoid
restricting access to the operator's position or essential components of the
vehicle.
 Attach the mounting tube to the front rack (Spraydome/Undavina) with the 'u' bolts
and mounting plates provided.
Installation
Micron Sprayers Ltd. Spraydome/Undavina and Spraymiser
21