Extron electronics DTP2 T 204 User Manual page 36

X1&
= TMDS output format
0 = Auto (default)
• For HDMI sinks, pass through.
• For DVI sinks, force DVI format.
1 = DVI RGB 444
2 = HDMI RGB "Full"
3 = HDMI RGB "Limited"
4 = HDMI YUV 444 "Limited"
5 = HDMI YUV 422 "Limited"
X1*
= Unit name — Text string of up to 24 alphanumeric characters including hyphens (-), with no
spaces. The first character must be a letter, and the last character cannot be a hyphen.
The default name is DTP2-T-204-xx-xx-xx, where xx-xx-xx is the last six characters of
the device MAC address.
X1(
= Verbose mode
0 = None (default for Telnet connection)
1 = Verbose mode (default for RS-232 and USB connections)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
NOTES:
•
In verbose response mode, the switcher responds with unsolicited responses
for value and setting changes that may result from a signal change, or a setting
adjustment made via another interface.
•
For example, the switcher can send out a notice of a change in some setting
without receiving a query via a PC or a control system. That change could have
been a result of an internal process, a selection made from the front panel, or
a selection made via PCS. This is an example of a verbose (wordy) relationship
between the controller and a connected device.
•
If tagged responses are enabled, all View type commands return the command
string plus the data, the same as in responses for setting a value. For example:
Command:
Response: Ipn
X2)
Set local date and time — MM/DD/YY-HH:MM:SS
=
Example: 06/22/19-05:19:00
Local date and time, displayed — Ddd, DD Mmm YYYY HH:MM:SS
Example: Sat, 22 Jun 2019 05:19:00
X2! =
IP address (nnn.nnn.nnn.nnn) Leading zeros in each of the four octets are optional in
setting values and are suppressed in returned values.
Default = 192.168.254.254
X2@
= Hardware media access code (MAC) address (00-05-A6-xx-xx-xx). The MAC address is
view-only and cannot be changed.
X2#
= Subnet mask (nnn.nnn.nnn.nnn)
Default = 255.255.0.0
X2$
= Gateway IP address (nnn.nnn.nnn.nnn)
Default = 0.0.0.0
X2%
= Domain name system (DNS) server IP address (nnn.nnn.nnn.nnn)
Default = 0.0.0.0
DTP2 T 204 Switcher • Remote Configuration and Control
E }
CN (View unit name)
• X1* ]
(tagged response)
X1* ]
or (untagged response)
28