Configure This Device Panel - Extron electronics DTP2 T 204 User Manual

To assign an administrator password:
1. In the Administrator Password field, enter the new password.
2. In the Confirm Password field directly under the Administrator Password field, enter
the same password from the field above.
3. Click the Apply button. The dialog box closes.
To assign a user password:
1. Ensure an administrator password is assigned.
2. In the User Password field, enter the new password.
3. In the Confirm Password field directly under the User Password field, enter the same
password from the field above.
4. Click the Apply button. The dialog box closes.
To remove a password:
1. In either the Administrator Password or User Password field, delete any existing
password, leaving the field blank.
2. In the corresponding Confirm Password field, press the <Space> key on the
keyboard.
3. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.

Configure This Device Panel

The Configure This Device panel (see figure 23,
download PCS which enables you to configure the DTP2 T 204 switcher. Click the
http://www.extron.com/download/
website (see
link to open the Download page of the Extron
Downloading and Installing PCS
on page 51) enables you to
7
on page 47 for further instruction).
DTP2 T 204 Switcher • Internal Web Page 57