Chapter 16 - Rebooting/Resetting The Ptc-1800; Introduction; Rebooting The Ptc-1800; Overview - Symbol PTC-1800 Product Reference Manual

Table of Contents

! Do not interfere with the operation

of the PTC-1800 during a resume,

reboot, or reset. Allow this process

to complete before pressing any

keys, replacing the battery pack, or

performing any other procedure.

Otherwise, the PTC-1800 may lock

up.

! Do not reboot the PTC-1800 unless

absolutely necessary. Rebooting the

PTC-1800 erases all programs and

data in RAM.

PTC-1800 Product Reference Guide

Rebooting/Resetting the PTC-1800

If your application locks up (stops responding to the

keyboard), reboot your PTC-1800. If the reboot is

unsuccessful, follow the instructions on the next page

to reset the PTC-1800.

Rebooting stops the PTC-1800, resets the unit, and

then restarts (boots) it. When the PTC-1800 starts

again, it returns you to the operating system.

1. Hold down the Hold key and press the Send key.

The PTC-1800's Main Menu displays.

2. Press the Down arrow key until Warm Reboot is

highlighted.

3. Press the Send key. The following message

displays: "Are you sure you want to warm boot?"

4. Press the Down arrow key to highlight either Yes

or No.

5. Press the Send key. If you selected Yes, wait for

the PTC-1800 to reboot. If you selected No, the

PTC-1800 will return to the operating system.

Chapter

Table of Contents