Chapter 3 Configuring TN-3270/5250
! Placing the PTC-1800 into ship
mode erases all programs and data
in RAM.
26
Ship mode
Ship mode is activated by pressing the Reset button
(located behind the PTC-1800's battery pack). In this
mode, most power to the unit is turned off.
Resume
If the PTC-1800 is suspended, pressing the On/Off key
or one of the Scan keys turns the PTC-1800 back on
and returns you to the point at which you left the
application.
When the PTC-1800 is in ship mode, pressing the On/
Off key will cause a cold reboot. This takes about 2 min.
PTC-1800 Product Reference Guide