Table of Contents
Advertisement
Tubular Mount Chopper Reel
Installation (Option)
1. Slide chopper reel arm assemblies over rear frame
bar using chopper reel placement drawings (See
Figures 2-11, 2-12, 2-13, and 3-19).
2. Bolt in place using bottom support plates, 3/4-10 x
10-1/2 hex head cap screws, and hex lock nuts.
3. Attach reel/gang bar assemblies to chopper reel arm
assemblies using placement drawings.
4. Bolt in place using gang bar mount plate, 3/4-10 x 5
hex head cap screws, and hex lock nuts.
5. If unfavorable conditions exist or the chopper reel is
not needed, the arm can be raised and pinned into a
higher position creating little or no disturbance of the
soil with the chopper reel (See Figure 3-20.)
3/16 HAIR PIN
1/4 X 2-1/2
SLOTTED
ROLL PIN
PIN
unused chopper reel position
Figure 3-20: Unused Chopper Reel Position
NORMAL OPERATING/
STORAGE POSITION
PINNED UP POSITION
(WHEN CHOPPER REEL
NOT REQUIRED)
ASSEMBLY INSTRUCTIONS
3-27
Advertisement
Table of Contents
