Twisted Hobbys Veloxity Manual page 30

Once the Welders has tacked up, join Repeat for the other side.
Locate the motor you will be using and
the two piece together as shown.
its mounting hardware. For the
Upgrade mount, four 3mm allen head
cap screws, for the wood mount, the
four longer self tapping screws
Make a part on the fuselage 275mm Play with the locations of your
Install the motor with the wires off to
the side in which the ESC will be back from the nose for the CG point. electronics to best achieve the CG point
mounted. that was just marked.
page 30
Rev: 2015.11.30.v01a