Table of Contents
Advertisement
Once you are happy with the tment
Start by attaching the motor mount.
Apply some Welders to the horizontal
and understand how all the part are
Put some glue into both the left and
tabs, front and back as shown.
installed, remove them all and prepare
right slots as shown.
to re-assembly with glue
Install the TOP SIDE rectangles by
Flip the airframe over now so the
Slide the mount into position, working
it a little from side to side to get good
squeezing glue into the slit and
BOTTOM SIDE is facing up. Squeeze
glue distribution. Make sure the slots
pressing them in, make sure they
some Welders into both to the slits.
and motor mount notch line up.
engage the motor mount and wipe away
any excess glue.
page 15
Rev: 2015.11.30.v01a
- Quick Links:
- Center of Gravity
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Veloxity and is the answer not in the manual?