Twisted Hobbys Veloxity Manual page 26

Install the carbon rectangles back into Locate the rudder and its control
Squeeze some Welders into the control
their slots, make sure they are ush surface horn. Note that it is installed
horn slot and apply a skim coat of
and wipe away any extra glue. Set aside from the side shown. Test t.
Welders to the base of the horn.
on a at surface to dry.
Once the wood pieces for the rudder are Make sure the rudder aligns with the
Install the horn into the slot and wipe
away any extra glue. dry, the rudder can be installed. Apply wood pieces and that it is straight and
some glue and join the two pieces. true with the main part of the fuselage.
page 26
Rev: 2015.11.30.v01a