Set The Time And Date - CAMDEN Invision TAC Series Installation Manual

8. Set the Time and Date

Setting the time and date requires you to login to the CV-TAC400 locally via the front panel.
A. Logging In
To access the service mode for configuration the user must login with a password. To do this, follow
the steps below:
Press and hold the 1, 4 and 7 buttons until the display shows "Enter password [_
Enter the CV-TAC400's password. The default Password is "1234#".
The Main Menu will be displayed.
Note: To access additional menu items press # to move down and * to move up the menu.
If you enter the wrong password five times in a row, you will be locked out of the unit for 2Hrs. Even
the help code will not be available.
If the wrong password is entered the display will show: "Password Incorrect". You may then repeat the
process.
From the main menu select 4. Date & Time
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
Figure 26 - Door and Power Connections
Main Menu
1. Event Log
2. Data Display
3. Service Menu
CV-TAC400 Installation Guide | 96
4. Date and Time
5. Exit
]".