Table of Contents
Advertisement
c. Select the "ELP Conf" tab. TheCV-TAC400 Configuration tables will be displayed.
d. For the first CV-TAC400 select the Option entry by double clicking
e. In the Option entry enter "013" to add or "006" to delete Telephone line sharing followed by enter.
Note Turning on telephone line sharing is done by adding 7 to the value in the Option entry. As the
default value is 6, adding 7 gives 13. More detailed information is below.
f.
Repeat steps 6 and 7 for each CV-TAC400 sharing the telephone line.
g. When all the changes have been completed Select the "SAVE" button. The data will be saved.
h. Close the form by selecting the CLOSE button.
18. Set the Facility Code
To add or change a facility code, follow the steps below:
a. Select the "View/Edit Data Records" Menu. A list of submenus will be displayed
b. Select the "Configuration Settings" submenu. The Configuration setting window will be displayed.
Do not change the CV-TAC400 Address field at the top of the window.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 111
Advertisement
Table of Contents
