Table of Contents
Advertisement
17. Entering Suite Information
Changing/Adding Suite Information
Floor, Express Code, Display Name, Telephone Number
Note: All the Suite records are already in the factory default file. The information has been set
to blank. To add a suite merely select a blank record and enter the information.
a. Select the "View/Edit Data Records" Menu. A list of submenus will be displayed
b. Select the "Suite/Directory Data" submenu. The Suite/Directory Data window will be displayed.
Note: The "Remote ELP DIP" field is not used and should not be changed.
c. Select the suite to be changed from the drop down list in the Suite ID-Display Name field
Note: You may use the up or down arrows to scroll through the list of suites. You may also use the
pg up
(page up) and pg dn (page down) keys to scroll the list quickly.
d. If required, Select the Floor from the list of Floors in the pulldown menu
e. If required, Edit the Express Code in the "Express Code" field
If required, Edit the Display Name in the "Display Name" field
f.
g. If required, Edit the Telephone Number in the "Telephone Num" field.
h. When the editing for the selected suite is complete, select the "Save" button (on the bottom left-
hand side of the form).
i.
When the editing for all the suites is complete, select the Close button(on the bottom right-hand
side of the form)
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 87
Advertisement
Table of Contents
