Table of Contents
Advertisement
c. Select the Access Level tab. The Access tables will be displayed.
d. In the Access Group table select (double click) the Door ID entry you wish to edit.
e. Enter the Door Id information and then press "Enter"
When the editing for the selected Access Group is complete, select the "Save" button (on the
f.
bottom left-hand side of the form).
C. Configuring Time Groups
Configuring a Time Group means setting a start time, an end time and list of days of the week the time
group is active. This is done in the Time Group List table.
To Configure a Time Group follow the steps below:
a. Select the "View/Edit Data Records" Menu. A list of submenus will be displayed
b. Select the "Configuration Settings" submenu. The Configuration setting window will be displayed.
Do not change the CV-TAC400 Address field at the top of the window.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 58
Advertisement
Table of Contents
