Table of Contents
Advertisement
e. Enter the user information as required.
Note: A User Name must always be entered so that the user may be listed in the reporting system.
Click the "Save" button when completed. The "Suite/Directory Data" form is displayed.
f.
Note: The close button closes the form and discards any changes.
g. Click the "Save" button.
h. When you have completed all the User Access changes click the "Close" button.
21. PIN Entry Information
The CV-TAC400 has a PIN entry function. When a user enters their assigned PIN (personal
identification number) the CV-TAC400 grants access in the same way as if the number 6 was entered
on a call to the suite. The CV-TAC400 maintains a list of PIN numbers and the associated Labels for
the PIN. Each PIN number must be between 5 and 9 digits long.
The PIN Code Label is a readable description of the PIN Code
You may enter up to a total of 20 PIN codes.
The maximum length of the PIN Code may be set to be between 5 and 9 digits. If the maximum length
is reduced after some PIN Codes have been entered the PIN codes already in the system will be
truncated. If this would result in duplicate codes an error message is generated and the operation is not
allowed.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 119
Advertisement
Table of Contents
