Table of Contents
Advertisement
Open (Double click on) the "Greeting Message" field of the CV-TAC400 you wish to change. The field
j)
will open for editing. You may change the text as required.
k) When the editing is complete press the "enter" key or select anywhere else in the "ELP Conf" table.
l)
Save and Upload the changed information.
15. Entering Suite Information
Changing/Adding Suite Information
Floor, Express Code, Display Name, Telephone Number
Note: All the Suite records are already in the factory default file. The information has been set
to blank. To add a suite merely select a blank record and enter the information.
a. Select the "View/Edit Data Records" Menu. A list of submenus will be displayed
b. Select the "Suite/Directory Data" submenu. The Suite/Directory Data window will be displayed.
Note: The "Remote ELP DIP" field is not used and should not be changed.
c. Select the suite to be changed from the drop down list in the Suite ID-Display Name field
Note: You may use the up or down arrows to scroll through the list of suites. You may also use the
pg up
(page up) and pg dn (page down) keys to scroll the list quickly.
d. If required, Select the Floor from the list of Floors in the pulldown menu
e. If required, Edit the Express Code in the "Express Code" field
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 33
Advertisement
Table of Contents
