Table of Contents
Advertisement
e. Select the factory Default file -> 500DIrs(noname)-nouser and then select "Open"
17. Setup the CV-TAC400's Configuration to Allow Slaves
If the Master and Slave unit are to share a telephone line, telephone line sharing must be enables. To
turn on telephone line sharing, follow the steps below:
a. Select the "View/Edit Data Records" Menu. A drop down menu box will be displayed.
b. In the drop down menu select the "Configuration Settings" Submenu. The Configuration setting
window will be displayed. Do not change the CV-400 Address field at the top of the window.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 110
Advertisement
Table of Contents
