Table of Contents
Advertisement
21. Uploading Saved Information into the CV-TAC400
A. Working Online Using the Rs485 Converter
If you have been working online throughout this guide, all you need to do is close the session.
a. Select the Session Menu
b. Select Close Session. The new configuration data is automatically uploaded to the CV-
TAC400.
B. Working Online Using the Modem Module
If you have been working online using the Modem Module, you cannot simply close the session.
The new data must be exported to the CV-TAC400.
a. Select the "Export Data to an ELP520(s)" from the "File Setup/Maintenance" menu. Select the
ELP520 Address from the pull down menu and hit Export Now.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 66
Advertisement
Table of Contents
