A. Configuring PIN Codes
To configure the PIN codes follow the steps below:
i.
Adding a New PIN Code
a. Select the "View/Edit Data Records" Menu. A drop down menu box will be displayed.
b. In the drop down menu select the "PIN Code" Submenu. The PIN Code form will be displayed.
c. In the PIN Code edit box, enter the new PIN code.
d. In the Label edit box, enter the associated Label
e. Select the "Add" button. The PIN Code list grid will be updated.
When all the changes have been completed, Select the "SAVE" button. The data will be saved.
f.
g. Close the form by selecting the CLOSE button.
22. Backup the Data
a. Select the Backup Menu
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 120