Table of Contents
Advertisement
6
|
1
Product Overview
The CV-TAC400 Entry Phone provides a simple, efficient and cost effective solution to condominium townhouse
or gated community access control and suite monitoring. The base unit permits multiple devices for Door,
Elevator and Garage control connected to its RS485 network.
The directory lists multiple suites and provides access codes with access levels. The access and elevator levels
determine what areas are accessible to the resident.
Access into and throughout a building is provided by means of Entry Phones, Card Readers, Radio Receivers,
and Elevator Controllers. The CV-TAC400 greatly simplifies the installation and programming of these devices
through a common set of programming algorithms and entry screens.
Elevator control for up to 4 cabs with 48 stories per building is provided. Elevator access may be controlled
through any device, i.e. Entry Phones, Card Readers or Receivers, in a variety of practical applications. For
example, a visitor may call the suite owner through the entry phone. Upon granting access to the visitor by
depressing a key on the telephone or suite panel, the CV-TAC400 will release the lobby door, determine the floor
of the suite owner and allow the visitor to have access only to that floor. In another scenario, the Camden CV-
TAC400 may grant access to a floor through a proximity card or RF transmitter code presented by the user.
The CV-TAC400 is flexible enough to offer a myriad of possibilities including direct elevator access into suites,
which is very common in loft apartments.
THE CV-TAC400 is programmed using the SFT5202 Windows Client software which runs on a Windows based
PC. The CV-TAC400 may be connected to the Windows PC remotely using a dialup connection or connected
locally using a USB to RS485 converter.
All of the program settings may be viewed from the CV-TAC400 LCD screen menu.
File:CV-TAC400_IN_MAN_NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
Advertisement
Table of Contents
