Table of Contents
Advertisement
b) Select the "Configuration Settings" submenu. The Configuration setting window will be displayed. Do
not change the CV-TAC400 Address field at the top of the window.
c) Select the "ELP Conf" tab. The ELP Configuration table will be displayed
d) Open (Double click on) the "Greeting Message" field of the CV-TAC400 you wish to change. The field
will open for editing. You may change the text as required.
e) When the editing is complete press the "enter" key or select anywhere else in the "ELP Conf" table.
f) Save and Upload the changed information.
13. Load the Factory Default
Using this file will erase all previously saved data.
The default factory file is located on the installation CD.
Start by selecting a file of current information. To do this, follow the steps below
a. Select the "File Setup/Maintenance" menu. A list of submenus will appear below.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 30
Advertisement
Table of Contents
