Table of Contents
Advertisement
address from the table below. To save the address you have just entered, press the # key. To exit
without changing the password enter the * key.
There must be one and only one Master CV-TAC400. Each system may have up to 3 slave CV-
TAC400's. The addresses must be unique within each system.
Address
1
14
15
16
8. Starting the SFT5202 Windows Client Software
The following instructions apply only if the default file locations were used in the software installation. If
any changes were made that location should be used.
To start the SFT5202 Windows Client Software open (double click) the SFT5202 icon on the desktop
If there is no SFT5202 icon on the desktop the following steps may be performed:
a. select the Start Menu from the windows desktop
b. select Programs from the start menu
c. select the "remoteAdmin" folder
d. select SFTD5202D from the list. The main SFT5202 Windows Client Software window will be
displayed
9. Establishing a Connection with the CV-TAC400
The CV-TAC400 is programmed via a Windows PC, using an USB to RS485 converter for local access
or an optional CV-TAC4M Modem Module for a remote dialup connection.
Remote Connection Using a Modem
Overview
The CV-TAC400 may be connected to a computer system over a telephone line. To do this the CV-
TAC400 requires the modem module. The computer requires a modem connected to it and the SFTD5202
software.
Using the modem is identical to the RS485 connection after the connection has been made. Because a
computer with a modem may be used to manage multiple CV-TAC400's, the "Open Session" initialization is
not used. Downloading and uploading data using the modem is described below in sub-section 11 - 'Open
a Session with the CV-TAC400 (Working Online with a Modem Connection) and sub-section 16, Part B –
'Uploading Saved Information into the CV-TAC400 – Working Online Using the Modem Module'.
The telephone number and password for each building must be entered into the system. When you wish to
update that particular building the dialing information can be selected from that list.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Operation
CV-TAC400 Master
CV-TAC400 Slave 1
CV-TAC400 Slave 2
CV-TAC400 Slave 3
CV-TAC400 Installation Guide | 20
Advertisement
Table of Contents
