Table of Contents
Advertisement
b. Select the "Save" button.
c. The modem is initialized.
Setting the Remote Modem
Overview
Each remote site that this system connects to will have an associated password and phone number. These
may be stored in a list so that they may be easily accessed.
Setting up a Remote Modem
To add a remote site and its phone number and password to the list of sites follow the steps below:
a. Start the SFT5202 Windows Client Software.
b. Select the "Setup" menu. A list of submenus will be displayed
c. Select the "List Remote Modem(s) Setting" submenu. The "Remote Modem Information" form will
be displayed.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 46
Advertisement
Table of Contents
