e. Enter the Remote telephone number in the "Telephone Number" box.
Enter the Remote modem Password in the "ELP Default Password" box.
f.
g. Enter the Building Identification in the "Building Information" box.
h. Select "OK" to save the information or "Close" to exit without saving
Starting a Connection
Overview
To communicate with a remote system via modem you must first start the connection. As the system does
not know which system will be connected you do not use start session.
Starting the Connection
a. To start a connection to a remote system follow the steps below:
b. Start the SFT5202 Windows Client Software.
c. Select the "Setup" menu. A list of submenus will be displayed
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 24