Table of Contents
Advertisement
b. Select Close Session. The new configuration data is automatically uploaded to the CV-
TAC400.
B. Working Online Using the Modem Module
If you have been working online using the Modem Module, you cannot simply close the session.
The new data must be exported to the CV-TAC400.
a. Select the "Export Data to an ELP520(s)" from the "File Setup/Maintenance" menu. Select the
ELP520 Address from the pull down menu and hit Export Now.
b. The new configuration data is exported to the remote panel.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 122
Advertisement
Table of Contents
