Table of Contents
Advertisement
If required, Edit the Display Name in the "Display Name" field
f.
g. If required, Edit the Telephone Number in the "Telephone Num" field.
h. When the editing for the selected suite is complete, select the "Save" button (on the bottom left-
hand side of the form).
i.
When the editing for all the suites is complete, select the Close button(on the bottom right-hand
side of the form)
16. PIN Entry Information
The CV-TAC400 has a PIN entry function. When a user enters their assigned PIN (personal
identification number) the CV-TAC400 grants access in the same way as if the number 6 was entered
on a call to the suite. The CV-TAC400 maintains a list of PIN numbers and the associated Labels for
the PIN. Each PIN number must be between 5 and 9 digits long.
The PIN Code Label is a readable description of the PIN Code
You may enter up to a total of 20 PIN codes.
The maximum length of the PIN Code may be set to be between 5 and 9 digits. If the maximum length
is reduced after some PIN Codes have been entered the PIN codes already in the system will be
truncated. If this would result in duplicate codes an error message is generated and the operation is not
allowed.
A. Configuring PIN Codes
To configure the PIN codes follow the steps below:
i.
Adding a New PIN Code
a. Select the "View/Edit Data Records" Menu. A drop down menu box will be displayed.
b. In the drop down menu select the "PIN Code" Submenu. The PIN Code form will be displayed.
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
CV-TAC400 Installation Guide | 34
Advertisement
Table of Contents
