Related Manuals for CAMDEN TAC IP 100 series
Summary of Contents for CAMDEN TAC IP 100 series
- Page 1 Quick Start Guide Camden TAC IP 100 Series Entry System © 2018 Camden Door Controls...
-
Page 2: About This Manual
©2018 Camden Door Controls. All rights reserved. This document should not be construed as a commitment on the part of Camden. The information it contains is subject to change without notice. Camden assumes no responsibility for errors that may appear within this document. -
Page 3: Installation Considerations
Quick Start Guide These instructions are intended to accommodate immediate use of the TAC IP 100. However, it is important to read this owner’s manual before attempting more extensive use. This owner’s manual contains information about features that enhance operation and performance, as well as important safety, installation, and operation instructions designed to prevent personal injuries as well as product damage. - Page 4 Caution Never make or break connections to the TAC IP 100 unless it and all associated components are powered off and disconnected from electrical outlets. TAC IP 100 Wiring Connections • Recommended PS133UP +12VDC Power Supply • Ethernet Cable • Postal Lock •...
- Page 5 10 people on the phone will require 10 times as much bandwidth as having 1 person on the phone. The Camden TAC IP 100 entry system uses 80 kbps for each concurrent phone call. If video is being monitored at a central station, each entry system camera uses 1.6 Mbps.
-
Page 6: First-Time Power Up
First-Time Power Up Upon powering up, the VOIP Tele-Entry System will display its startup script for about 1 minute 45 seconds, then present the user screen. If this procedure fails, be sure the unit is powered up. Shut the unit off, wait 15 seconds, and then to power up the TAC IP 100. - Page 7 Note The TAC IP 100 is designed to acquire an IP address automatically from the DHCP server on start-up. Ensure that DHCP server is NOT disabled in your modem/router. If the buttons and images of the VOIP Tele-Entry System Configuration page appear to overlap; use the “View” and “Zoom Out” feature options on your browser to improve the page view.
- Page 8 Register your TAC IP 100 with Vistadial Communications If your system is connected to the Internet, please click the Register with Vistadial and register your system. Camden, through its relationship with Vistadial, pre-configures every product requiring VoIP services to permit a quick, seamless integration to the VistaDial VoIP services offering.
- Page 9 Note If a key is set to release the door (see system details section in owner’s manual). The person using the test telephone may press the set key to release the door lock. The DTMF field displays what keys are pressed by the test telephone.
- Page 10 Liability Statement Camden Door Controls has created this guide to serve as a general orientation to the topic and assumes no liability whatsoever for errors or omissions in the information contained herein, nor in how this information is understood or interpreted. In all cases, the reader is directed...