ROPS (ROLL OVER PROTECTION STRUCTURES)
Sliding Seat
How to adjust the seat
Before operating the tractor, it is important to adjust the seat to the most comfortable position and ensure
that it is properly locked in its position.
1 - Seat Belt
2 - Forward / Reverse Position Adjustment Lever
Warning: Do not place your hand between the seat and the guide rail when adjusting the seat.
You may be injured.
To select the seat position, move the adjustment lever and move the seat closer or further away from the
instrument panel and controls.
Danger: Check that the seat is properly locked in its position before driving the tractor.
Danger: Always use the seat belt when the ROPS is installed/lifted. Do not use the seat belt if
the ROPS is folded down or not installed. Check the seat belt regularly and replace it if it is frayed or
damaged.
NOTE:
Do not use solvents to clean the seat. Use warm water and add a little of detergent to it.
CCL25004
13